Flow Compartments in Viscoelastic Fluids Using Radial Impellers in Stirred Tanks

The influence of viscoelastic flow properties on fluid dynamics using radial impellers is investigated. The use of transparent model fluids allows for the optical measurement of general flow behavior with a fluorescence dying technique. By varying viscoelastic flow properties, size of agitators and rotational frequency, the impact of these parameters on fluid dynamics is analyzed. Toroidally shaped, cavern‐like flow compartments form around the agitators in all fluids in specific rotational frequency ranges, preventing an efficient mixing. By balancing elastic with centrifugal forces, a simple model is developed with which compartment sizes can be predicted with good accuracy. The results indicate a good suitability of the elasticity number as a scale‐up criterion.     

The residual zonal flow in tokamak plasmas with a poloidal electric field

In a tokamak plasma with auxiliary heating by cyclotron waves, a poloidal electric field will be produced, and as a consequence influence the residual zonal flow(RZF) level. The poloidal electric field can also be induced through biasing electrodes at the edge region of tokamaks.Numerical evaluation for a large aspect ratio circular cross section tokamak for the electron cyclotron wave heating indicates that the RZF level decreases significantly when the poloidal electric field increases. Qualitatively, the ion cyclotron wave heating is able to increase the RZF level. It is difficult to apply the calculation to the real cyclotron wave heating experiments since we need to know factors such as the plasma profiles, the exact power deposition and the cross section geometry, etc. It is possible to use the cyclotron wave heating to control the zonal flow and then to control the turbulence level in tokamak experiments.     

Imaging the Curie Point isothermal surface and predicting its impact on the geothermal regime within the Nile Delta,Egypt

The available aeromagnetic data together with information from some available wells have been used in the current study to shed the light on the geothermal setup of the Nile Delta Province. The aeromagnetic data was reduced-to-pole and critically analyzed using the Spectral Analysis Technique through the Fast Fourier Transform (FFT), to determine the expected depths to the Basement and Curie Point (CPD) surfaces. The geothermal gradient between CPD and earth's surface was estimated, and accordingly the heat flow was evaluated using the proposed thermal conductivity. Then, the Basement Surface Temperature (BST) was estimated, by which the geothermal gradient and heat flow for the igneous-rocky basement and sedimentary-rocky horizon was independently predicted. By which, it could be possible to distinguish between the heat flow contribution from each horizon separately.     

水平井筒气水流动规律及影响因素

由于流动方向变化及壁面流体的不断径向入流，水平井筒的气水流动规律与常规直井存在较大差异。在总结前人研究结果的基础上，优选水平井筒气液两相预测模型，并在验证模型可靠的情况下，考虑管壁入流和气液流型变化，改变气量、水量、管径、倾角、轨迹波动、气水入流位置等多个影响因素，对水平段流型、压力分布规律及影响因素进行综合预测分析，为水平气井的生产管理及后期措施优化提供依据。研究结果表明，一般生产条件下水平井筒存在分层流、间歇流和环雾流3种流型，管径和倾角对水平井筒的气、水流型影响最为明显，管壁入流对入流就地井筒流态的影响较小。水平井筒压力损失与气量、水量、轨迹上倾角及轨迹波动起伏程度呈正相关性，而与管径和下倾角呈负相关性。预测范围内，气量、轨迹上倾和管径对水平井筒压力损失的影响最为明显，是水平井筒压降的关键影响因素。随着轨迹上倾角增加，水平井筒压降随气量的变化规律发生明显反转，低气量条件下水平井筒压降随气量的减小而增加，高气量下压降随气量增加而增加。     

Fabrication of composites from different carbon content ferrous powders adopting thermomechanical processes

In this research, deep consolidation technique is utilized for processing of low and high carbon content ferrous powders to manufacture composite material. High carbon content ferrous powders were used as reinforcing material. The powder particles were allowed to mix with low carbon content ferrous powders in 50:50 weight percent for fabrication of composites. The composites were heat treated at three different temperatures (i.e., 800°C, 900°C, and 1000°C). The changes in microstructure, microhardness, the grain size, and bonding among powder particles were studied. Refinement of grains was observed and this led to improved hardness enabling the processed material to be used as a suitable composite. Abrasive wear tests were carried out using a laboratory tribometer in dry reciprocating sliding contact against Sic abrasive paper. The outcomes demonstrate that the abrasive wear resistance was notably affected by the treatment temperature and hardness of the composites.     

MHD flow in a rectangular duct with a perturbed boundary

The unsteady magnetohydrodynamic (MHD) flow of a viscous, incompressible and electrically conducting fluid in a rectangular duct with a perturbed boundary, is investigated. A small boundary perturbation $\epsilon$ is applied on the upper wall of the duct which is encountered in the visualization of the blood flow in constricted arteries. The MHD equations which are coupled in the velocity and the induced magnetic field are solved with no-slip velocity conditions and by taking the side walls as insulated and the Hartmann walls as perfectly conducting. Both the domain boundary element method (DBEM) and the dual reciprocity boundary element method (DRBEM) are used in spatial discretization with a backward finite difference scheme for the time integration. These MHD equations are decoupled first into two transient convection–diffusion equations, and then into two modified Helmholtz equations by using suitable transformations. Then, the DBEM or DRBEM is used to transform these equations into equivalent integral equations by employing the fundamental solution of either steady-state convection–diffusion or modified Helmholtz equations. The DBEM and DRBEM results are presented and compared by equi-velocity and current lines at steady-state for several values of Hartmann number and the boundary perturbation parameter.     

The use of bio-diesel based additive as rheology improver and pour point depressant of Nigerian waxy crude

The chemical method has proved to be the most effective mitigating method of wax deposition in petroleum system as it deals with the root cause of wax formation. Most of the commercial chemicals in the industry are very expensive and toxic. This paper aims the use of biodiesel based additives for improving the rheological behavior and pour points of waxy crude from Nigeria field. The biodiesels derived additives gave better performance than the commercial chemical and the seed oils as greatly improvement in rheology and pour point values of the waxy crude were observed     

基于数据运营安全的个人信息保护

个人信息因其自身携带隐私特性,与每个个体息息相关。个人信息保护不当,影响公众权益、企业利益以及社会秩序。在互联网、大数据、5G万物互联的时代,个人信息被广泛收集和使用,必须妥善解决个人信息保护问题,才能保障整个数据产业健康发展。而现有的个人信息保护方法或技术,不足以应对新形势下的保护诉求。基于数据运营安全的个人信息保护,针对当前个人信息保护的新形势和新诉求,提出结合人工智能,通过数据运营安全对结构化、半结构化、非结构化的个人信息流动的保护,涵盖从生产到运维,从采集、传输、存储、处理、分析、共享、销毁全生命周期保护,深入数据运营中内嵌防护,同时与业务解耦,达到保护个人信息安全的目标。